Perfectly matched system for dry drilling reinforced concrete. The DME19DP in conjunction with TYROLIT TGD®-Technology dry drill bits is the solution for dry drilling applications in reinforced concrete. The practical centring aid ensures precise drill bit guidance and a longer diamond tool lifetime. Switchable soft impact function accelarates work progress, particularly in hard materials. The soft start and the LED indicator aid the user in selecting the optimal drilling speed. Show more Show less

The combination of ceramic grains and our unique TYROLIT bonding system guarantees continuous aggressiveness with an unmatchable lifetime. CERABOND X stays sharp, making it the best solution for grinding steel and stainless steel in heavy-duty applications. Whether you’re edge grinding, surface grinding or removing welding seams, CERABOND X will get the job done faster. Show more Show less

TYROLIT has developed the MIRA Ultra product line specifically for the continuous generating grinding of gears. All specifications are produced without the addition of sintered aluminium oxide and combine outstanding performance data with optimum economic efficiency. The innovative grinding wheel structure was specially designed for operating speeds of up to 100 m/s and allows reliable operation on modern high-speed machines.

The PREMIUM*** LONGLIFE is a high-performance flap disc for steel and boasts an excellent stock removal rate and the longest lifetime. A stock removal rate of more than 4000g opens up a completely new dimension. A natural fibre core gives the tool additional flexibility, meaning that the PREMIUM*** LONGLIFE fits the workpiece surface perfectly and creates clean grinding transitions. Show more Show less

The PREMIUM*** LONGLIFE is a high-performance rough grinding wheel for surface and edge grinding. It is distinguished by its excellent lifetime. The 7, 8 and 10 mm thick LONGLIFE rough grinding wheels also provide enhanced dimensional stability during welding. The 4 mm thick LONGLIFE rough grinding wheel has been especially developed for use in pipeline construction and for fillet welding. Show more Show less

Cup wheels achieve maximum stock removal rates and lifetime for grinding jobs on large areas. The PREMIUM*** cup wheel for steel is ideal for edge grinding, bevelling and grinding welding seams. There is a choice of bore design 22.23 and thread design M14 for fitting to the tool. Observe operating speed: max. 50 m/s Show more Show less

The PREMIUM*** resin mounted points have a vibration reducing effect due to their composition and therefore boast low impact sensitivity. Due to their special quality, these points are best suited to deburring, bevelling and edge breaking on stainless steel. Due to their bond, they are specially suited to INOX materials. Maximum operating speed: 50 m/s Show more Show less

With SHIELD cup brushes, TYROLIT offers a protective coating against dust and wire breakages combined with user-friendly use. The transparent protection allows the operator an unrestricted view of the workpiece even when performing edge and corner grinding. In addition, the plastic flaps offer a high level of flexibility, making it possible to machine difficult-to-reach places. SHIELD brushes are available in various designs and wire types, and offer the highest safety levels when working on steel. Applications. Our products are also frequently used to clean welding seams. Show more Show less

Wire brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Twisted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. These wire brushes are characterised by their high level of flexibility. The wire brush opens due to centrifugal force. They are also particularly suitable for cleaning the inside of pipes. Knotted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. Also to remove burr, rust, rubber and other impurities in difficult-to-reach areas. Wire brushes with plastic achieve a longer lifetime. Show more Show less

Round brushes for floorstanding grinders. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less

TYROLIT hand brushes are suitable for practically any application. This tool enables the deburring and cleaning of welding seams and surfaces. The assortment consists of wire brushes with a varying number of wire sequences that can be used depending on the application. These products are equipped with a high-quality beech wood handle. Show more Show less

Ideal for electrical and installation work. The DME22SU drill motor is ideal for electrical and installation work. It features a 3-speed transmission and variable speed setting with soft start. Integrated overload cut-outs and the PRCD safety switch ensure safe working. Dry drilling is also possible with the included M16 adapter. Show more Show less

The TYROLIT PREMIUM*** RONDELLER® combines the product advantages of different grinding tools with the easiest handling. The unique geometry of the Rondeller® enables cool, ergonomic grinding that is kind to materials. Absolutely vibration-free use and optimal adaptation to the workpiece for all grinding, deburring and shaping applications means that curved surfaces can be perfectly machined. Show more Show less

The PREMIUM*** 1F80 high-performance rough grinding wheel is particularly suitable for universal grinding tasks on hard-to-reach areas. Using the wheel, flutes and notches can be added, and gears can be deburred. In addition, the wheel makes light work of maintaining turbine blades, and rough grinding curved surfaces in cavities and ridges. For diameters above 80 mm, we recommend using a protection cover. Show more Show less

Production of the TYROLIT PREMIUM*** burrs is performed on modern CNC grinding machines. The result is a highly efficient precision tool that achieves optimum grinding results. With this tungsten carbide burr you can achieve the longest lifetimes when used on practically any material. By choosing the right machine, the correct revolutions per minute and operating speed, and the appropriate cutting and tooth profile, you will pave the way for PREMIUM results. Show more Show less

The quality of the PREMIUM*** cut-off wheel ensures the longest lifetime and cost-effective operation. By using the grit size 100, a particularly low burr result is achieved. The cut-off wheel in small diameters is designed for use on straight grinders. This tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. Show more Show less

TYROLIT provides the optimal tools for use on large cut-off machines in trade and industry. These include the PREMIUM*** cut-off wheel for steel in large diameters. This special tool is ideal for cutting workpieces with large cross-sections. As with all TYROLIT PREMIUM*** cut-off wheels, this tool has been optimised to achieve the best possible cutting ability and lifetime. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

TYROLIT provides the optimal tools for use on stationary cutting machines in chop cut. These include the PREMIUM*** cut-off wheel for steel in diameters from 300 to 500 mm. This special tool is ideal for cutting workpieces with large cross-sections, as well as solid material and profiles. As with all TYROLIT PREMIUM*** cut-off wheels, this tool has been optimised to achieve the best possible cutting ability and lifetime. Show more Show less

With the TYROLIT rough cleaning wheel you can effortlessly remove rust, paint, lacquer and underbody sealant from your workpiece. The porous nylon fibres, treated with aggressive abrasives, meet any challenge. At the same time, they prevent clogging or loading of the wheel. This wheel offers the user quiet, non-strenuous grinding combined with low generation of heat. Show more Show less

With the TYROLIT rough cleaning wheel you can effortlessly remove rust, paint, lacquer and underbody sealant from your workpiece. The porous nylon fibres, treated with aggressive abrasives, meet any challenge. At the same time, they prevent clogging or loading of the wheel. This wheel offers the user quiet, non-strenuous grinding combined with low generation of heat. When using the longer clamping spike, two 1GR can be clamped providing a greater contact area and faster progress. Show more Show less

With the PREMIUM*** CONDITIONING wheel you can remove all rough scratch marks from the surface before commencing the polishing process. The three-dimensional flap design reduces clogging of the wheel to a minimum. Using the wheel also prevents discolouration on the workpiece caused by high heat build-up. The tool has been specially developed to achieve the best results even on non-adjustable angle grinders. Show more Show less

The TYROLIT JUTE disc is a new, unique grinding wheel that combines abrasiveness with a high level of comfort while working. This tool can be used on both steel and stainless steel. The longest lifetime and an environmentally friendly jute fibre core deliver the best performance. An additional back up pad is not required, as there is already one integrated in the product. The natural fibre core can be trimmed, giving it the edge over other discs in terms of its lifetime. This saves the user time and great expense. Show more Show less

With the new TYROLIT SCM program, we are now taking a further step towards economic efficiency. With SCM, the machining time of the workpiece can now be greatly reduced. A saving of one to three work steps is thus the key benefit. Thanks to the quick and high stock removal rate, applications such as the reduction of surface roughness, removal of discolouration, smoothing of surfaces and the cleaning and removal of weld seams can be realised. Another advantage of SCM lies in the deburring of tool edges without additional stock removal. Furthermore, the TYROLIT SCM program is yielding the best results in terms of lifetime, which in turn is evidence of the economic efficiency of these products. Show more Show less

The Premium*** belts have been specially designed for the mini belt grinder and prevent grain break outs on the tool due to their special curvature. A good stock removal rate and long lifetime allow consistent results to be delivered in shorter working hours. Our belts are easy to handle and mount. TYROLIT mini belts can be used on all steel, stainless steel and nonferrous metals. Show more Show less

The special feature of the PREMIUM*** paper rolls is a latex-finished backing, which makes them ideal for wet and dry applications. This is the perfect product for preparing and machining metal, wood, paint and lacquer. The closed coating of the PREMIUM*** paper roll delivers an excellent surface finish. Show more Show less

The special feature of the PREMIUM*** paper sheets is a latex-finished backing, which makes them ideal for wet and dry finishing. This is the perfect product for preparing and machining metal, wood, paint and lacquer. The closed coating of the PREMIUM*** paper sheets delivers an excellent surface finish. Show more Show less

TYROLIT FAST CHANGE enables you to change a disc very quickly thanks to the Velcro fastening. A unique, strong paper backing combined with zirconium makes this product extremely abrasive and durable, and active coolants enable cool, clean grinding to be performed on the workpiece. Thanks to the thin fibre backing with grit 40 and strong paper backing the TFC is the optimal tool for removing smaller welding and spot weld seams. Show more Show less

With TYROLIT QUICK CHANGE DISCS you can save time and thus increase productivity. They provide easy handling and can be used without the need for any additional mounting tools. These QUICK CHANGE DISCS are specially designed for general grinding tasks on steel. Our two different types cover the main mounting systems. Show more Show less

PREMIUM*** rollers are used on burnishing machines for general grinding processes, cleaning, finishing and for polishing uneven or curved surfaces. As the wear pattern remains stable throughout the product lifetime, a consistent high-quality surface finish is delivered. The comprehensive assortment offers products for removing welding tracks, scratches and oxidation residue, as well as for pre-treating surfaces. Show more Show less

PREMIUM*** rollers for bench grinders can be used for general grinding processes, including cleaning, finishing and for polishing uneven or curved surfaces. As the wear pattern remains stable throughout the product lifetime, a consistent high-quality surface finish is delivered. The comprehensive assortment offers products for removing welding tracks, scratches and oxidation residue, as well as for pre-treating surfaces. Show more Show less

TYROLIT spiral belts are used for fine grinding and deburring work, as well as shaping complex workpieces. The combination of zirconium and an additional coolant enables them to be used on many different materials. The variety of grit sizes available means they can be used for very high stock removal or fine grinding. The spiral belts can easily be mounted on an axle or an expandable mandrel. Accessories also form part of our assortment. Show more Show less

With Hylas, TYROLIT introduces a new line of wheels for grinding furniture and technical glass. The most significant benefits are: fast startup, high speed, excellent quality finishing as well as extreme flexibility of use. HYLAS allows the same wheel to be installed on different double edging machines, regardless of the type of machine fitting, thanks to the simple use of suitable adaptors. Hylas has also been designed to never need reprofiling and thus offers the advantage of working always with a new grinding wheel.

The DME17 is a 2-speed dry drill motor for drilling diameters up to 200 mm. The DME17 is a 2-speed dry drill motor for drilling diameters up to 200 mm. The powerful 2.0 kW motor, in combination with the switchable soft impact, enhances the drilling performance in reinforced concrete and in other hard materials. The machine can be both hand-held and drill-rig operated. The compact design, low weight and integrated dust extraction system makes the core drill very user-friendly. This model is unique in that it is available in three speed versions (standard, slow and quick) and thus optimally covers the most varied of customer needs. Show more Show less

The PREMIUM*** flap disc for steel is a versatile professional tool suitable for universal grinding tasks. With this disc, users will achieve perfect surfaces on steel, as well as the best results for surface or edge grinding and deburring work. The supporting disc is made of rigid fibre glass and is therefore ideally suited to use on powerful angle grinders. Show more Show less

Cup wheels achieve maximum stock removal rates and lifetime for grinding jobs on large areas. The PREMIUM*** cup wheel specially designed for stainless steel is also ideal for edge grinding, bevelling and grinding welding seams. There is a choice of bore design 22.23 and thread design M14 for fitting to the tool. Observe operating speed: max. 50 m/s Show more Show less

The PREMIUM*** resin mounted points (dark brown) have a vibration reducing effect due to their composition and therefore boast low impact sensitivity. Due to their special quality, these points are best suited to deburring, bevelling and edge breaking on cast iron materials. Due to their bond, they are specially suited to casting. Maximum operating speed: 50 m/s Show more Show less

With SHIELD cup brushes, TYROLIT offers a protective coating against dust and wire breakages combined with user-friendly use. SHIELD brushes are available in various designs and wire types, and offer the highest safety levels when working on steel. Applications. Our products are also frequently used to clean welding seams. The transparent protection allows the operator an unrestricted view of the workpiece even when performing edge and corner grinding. In addition, the plastic flaps offer a high level of flexibility, making it possible to machine difficult-to-reach places. Show more Show less

Wire brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Twisted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. These wire brushes are characterised by their high level of flexibility. The wire brush opens due to centrifugal force. They are also particularly suitable for cleaning the inside of pipes. Knotted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. Also to remove burr, rust, rubber and other impurities in difficult-to-reach areas. Show more Show less

The versatile round brushes for floorstanding grinders are used in a variety of industries. These wire brushes with knotted wire can be used to remove rust and paint, as well as for fine grinding. They also come in useful for polishing and matting stainless steel workpieces. TYROLIT wire brushes are manufactured to the highest standards to make work for the operator easier and safer. Show more Show less

These brushes are stainless steel specialists when it comes to deburring and cleaning welding seams and surfaces. The assortment consists of wire brushes with a varying number of wire sequences that can be used depending on the application. These products are equipped with a high-quality beech wood handle. Show more Show less

Efficient motor with very high drilling performance. The DME20 drill motor provides impressive drilling performance in the power range up to 2 kW. The mechanical and electronic overload cut-out and the full metal housing ensure high reliability. Built-in performance and service indicators, as well as the levelling aid, also enable easy operation. The drill motor is suitable for universal use and covers a wide variety of application areas: manual/drill-rig guided and wet/dry (DME20PU). Show more Show less

The TYROLIT PREMIUM*** RONDELLER® combines the product advantages of different grinding tools with the easiest handling. The unique geometry and stud pattern of the RONDELLER® enables ergonomic grinding that protects materials. Absolutely vibration-free use and optimal adaptation to the workpiece for all grinding jobs means that curved surfaces can be perfectly machined. Show more Show less

The PREMIUM*** 1F80 high-performance rough grinding wheel is particularly suitable for universal grinding tasks on hard-to-reach areas. Using the wheel, flutes and notches can be added, and gears can be deburred. In addition, the wheel makes light work of maintaining turbine blades, and rough grinding curved surfaces in cavities and ridges. For diameters above 80 mm, we recommend using a protection cover. Show more Show less

Production of the TYROLIT PREMIUM*** burrs is performed on modern CNC grinding machines. The result is a highly efficient precision tool that has been specially developed for use on nonferrous metals. With these products you can achieve the longest lifetimes. By choosing the right machine, the correct revolutions per minute and operating speed, and the appropriate cutting and tooth profile, you will pave the way for PREMIUM results. Show more Show less

The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The PREMIUM*** cut-off wheel in small diameters is designed for use on straight grinders. This tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. Show more Show less

This wheel has been developed specially based on specifications for cutting rails. Despite extreme application conditions, such as humidity, cold and temperature fluctuations, the rail cut-off wheel from TYROLIT offers short cutting times coupled with minimal effort. Exceptionally clean, non-discoloured surfaces reduce reworking tasks and working times. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

TYROLIT provides the optimal tools for use on stationary cutting machines in chop cut. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. Despite its versatile use, the tool offers maximum cutting ability and the longest lifetime. The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting or a reduction in the fatigue strength. Show more Show less

These accessories enable the 1GR rough cleaning wheel to be clamped onto straight grinders. Easy handling and the highest possible levels of safety are guaranteed for the operator. Please observe the maximum permissible speed of your tool.

To prepare surfaces for polishing, you require a sturdy, high-quality tool. The PREMIUM*** PRE-POLISH comprises several layers of abrasive fabric to achieve a long lifetime and sturdiness. This allows the tool to be used for smaller deburring jobs as well. The tool has been specially developed to achieve the best results even on non-adjustable angle grinders. Show more Show less

The intelligent design of our SCM discs enables them to be used on all the back up pads available in our assortment. The removable centre hole of the SCM disc enables the disc to be fitted to the back up pad in a self-centring position. The discs and back up pads are designed for use on the angle grinder in all common diameters from 115 to 178 mm. Show more Show less

With a semi-open grain distribution on a light paper backing, TYROLIT PREMIUM*** paper rolls are ideally suited to hand sanding or for use on orbital sanders. The semi-open coating of the PREMIUM*** paper roll prevents loading of the product and delivers an excellent surface finish. Show more Show less

The paper sheets made of silicon carbide are the perfect product for preparing and machining metal, wood, paint and lacquer. The special feature of the PREMIUM*** sheets is a latex-finished backing, which makes them ideal for wet and dry finishing. The closed coating of the PREMIUM*** paper sheets delivers an excellent surface finish. Show more Show less

TYROLIT FAST CHANGE enables you to change a disc very quickly thanks to the Velcro fastening. This durable and flexible product has been developed with a special film backing to achieve improved edge stability and stock removal rate. The product delivers an exceptionally even finish on lacquers, paints and composites. Clogging and loading of the disc is reduced, thus increasing the product's lifetime. Show more Show less

With TYROLIT QUICK CHANGE DISCS you can save a considerable amount of time. This specification delivers maximum stock removal rates at the same time as a long lifetime. This is achieved by combining the zirconium and ceramic aluminium oxide with a three-layer product structure. In addition, this product also delivers a high level of stability, low grain break-out and enhanced edge stability. Show more Show less

The patented shape of the newly developed PREMIUM*** spiral rollers means they are extremely easy and convenient to use without lateral deflection. Using the PREMIUM*** spiral rollers significantly increases productivity by avoiding typical roller imprinting on the workpiece. This means grinding processes do not have to be performed again. In addition, vibrations are considerably reduced and the load is minimised. The convenient and intuitive operation does not require extensive training to learn, meaning convincing results are achieved immediately. Show more Show less

With belts from the TYROLIT SCM range, TYROLIT is taking another step towards economic efficiency. The machining time of the workpiece can now be greatly reduced. A saving of one to three work steps is thus the key benefit. Thanks to the quick and high stock removal rate, applications such as the reduction of surface roughness, removal of discolouration, smoothing of surfaces and the cleaning and removal of weld seams can be realised. In addition, the TYROLIT SCM range boasts the best results in terms of lifetime. Show more Show less

This expandable rubber support has been specially designed for use with spiral belts. Expanding the flaps on the support enables the spiral belt to be fixed, ensuring it is safe and easy to mount. These accessories are suitable for all spiral belts in our assortment. Show more Show less

These reduction bushes can be used for bench grinder roller applications. With this set, you have the option of reducing the original bore diameter to 32, 25, 22, 20, 16 or 12 millimetres.

The PREMIUM*** Fastcut rough grinding wheel optimises the cutting ability and, together with its unique "Comfort-start" edge, realises the highest level of comfort plus an excellent lifetime. All of these features guarantee economical and efficient methods for the operator with regard to the comfortable machining of steel and stainless steel. You can see for yourself the performance and abrasiveness of the FASTCUT rough grinding wheel. Show more Show less

The MIRA ULTRA SF product line has been specifically developed for Superfinishing (SF) gears during continuous generating grinding. The worm grinding wheel is designed as a 2-zone tool with a ceramic zone and a resin zone. The ceramic zone is used for pre-grinding and finish grinding, while the resin zone is used for superfinishing. This innovative tool design meets the high surface requirements of the automotive and transmission industries for polished surfaces on tooth flanks. Show more Show less

The PREMIUM*** flap disc for steel is a versatile professional tool suitable for universal grinding tasks. With this disc, users will achieve perfect surfaces on steel, as well as the best results for surface or edge grinding and deburring work. The supporting disc is made of rigid fibre glass and is therefore ideally suited to use on powerful angle grinders. Show more Show less

We at TYROLIT always endeavour to bring our customers innovative products and a comprehensive assortment. For this reason, TYROLIT has now extended the CERABOND family to include the new CERAMIC flap discs. A unique bond system combined with a high-performance PREMIUM cloth offers the operator greater abrasiveness. This flap disc is particularly suitable for stainless steels and demanding grinding applications. In addition, the unique bond system prevents premature grain break-out and leads to a long product lifetime. The additional TOP SIZE coating ensures cooler grinding, allowing a longer lifetime and reducing discolouration on the workpiece surface. Also available Show more Show less

This rough grinding wheel is particularly suitable for steel and stainless steel applications. Due to its softer design, the PREMIUM*** 2in1 is quick and convenient to use and requires minimal effort. This is made possible by a new bond with coarser grain and a new layer composition. What makes our 2in1 rough grinding wheel so unique is the bevelled and defined edge of the tool. With the "Comfort Start" edge, the user can achieve a pleasant start to grinding and the level of comfort while working is increased many times over. Show more Show less

Cup wheels achieve maximum stock removal rates and lifetime for grinding jobs on large areas. The stone cup wheel is particularly suitable for pre-grinding imperfections on concrete surfaces, bevelling and pre-grinding artificial stone and patio slabs, surface grinding on marble, slate and granite. There is a choice of bore design 22.23 and thread design M14 for fitting to the tool. Observe operating speed: max. 50 m/s Show more Show less

In foundries and mould making, using ceramic mounted points is often the only method of achieving improved surface results on hard-to-reach parts. TYROLIT PREMIUM*** mounted points offer the highest possible lifetime even for hardened steels. These tools also strike a perfect balance in terms of chip performance and the intended surface finish. Maximum operating speed: 50 m/s Show more Show less

Wire brushes are universal tools for all applications. Cup brushes in particular are among the most commonly-used brush tools. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less

Wire brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. They are also particularly suitable for cleaning the inside of pipes. Knotted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. Also to remove burr, rust, rubber and other impurities in difficult-to-reach areas. Show more Show less

The versatile round brushes for floorstanding grinders are used in a variety of industries. Wire brushes with silicon carbide are very hard and thus enable very high stock removal rates. Their use includes deburring work on various workpieces made of practically any material, such as steel, aluminium, stainless steel, copper, brass, etc. In addition, silicon carbide is used for wood structuring. Round brushes with aluminium oxide are somewhat softer and therefore less abrasive. They are primarily used in wood structuring, but also for light deburring if very small rounded edges are desired. TYROLIT wire brushes are manufactured to the highest standards to make work for the operator easier and safer. Show more Show less

TYROLIT hand brushes are suitable for practically any application. This tool enables the deburring and cleaning of welding seams and surfaces. The assortment consists of wire brushes with a varying number of wire sequences that can be used depending on the application. These products are equipped with a high-quality beech wood handle. Show more Show less

Optimum handling due to extremely compact size and low weight. The low weight and extremely compact size are the highlights of the DME24 and ensure perfect handling. The mechanical and electronic overload cut-out and the full metal housing ensure high reliability. Built-in performance and service indicators, as well as the levelling aid, also enable easy operation. The drill motor is available with different drill rig attachments (ModulDrill™ quick clamping system or universal plate). Show more Show less

The PREMIUM*** 1F80 high-performance rough grinding wheel is particularly suitable for universal grinding tasks on hard-to-reach areas. This product has been specially developed for nonferrous metals and is ideal for adding flutes and notches, as well as deburring gears. In addition, the wheel makes light work of maintaining turbine blades, and rough grinding curved surfaces in cavities and ridges. For diameters above 80 mm, we recommend using a protection cover. Show more Show less

The PREMIUM*** tungsten carbide burr set contains common burrs for machining cast iron, steel and stainless steel materials. Production on CNC machines results in a highly efficient precision tool that achieves optimum grinding results. With this tungsten carbide burr you can achieve the longest lifetimes when used on practically any material. By choosing the right machine, the correct revolutions per minute and operating speed, and the appropriate cutting and tooth profile, you will pave the way for PREMIUM results. Show more Show less

These accessories enable cut-off wheels with small diameters to be clamped onto straight grinders. Easy handling and the highest possible levels of safety are guaranteed for the operator. Please observe the maximum permissible speed.

In order to cut nonferrous metals, the tool must have a high cutting ability. To this end, TYROLIT has developed a special formula and production method in order to be able to perform stationary cutting on NF metals too. New specifications prevent the clogging and dulling of the grinding wheel which used to be a common result of material abrasion. As with all TYROLIT PREMIUM*** cut-off wheels, this tool has been optimised to achieve the best possible cutting ability and lifetime. Show more Show less

Compared to conventional felt wheels, this product uses highly flexible flaps for optimum heat distribution and cool grinding. In doing so, the PREMIUM*** POLISH avoids undesired discolouration. Used in combination with the TYROLIT grinding paste, a perfect mirror finish is achieved on your workpiece. The tool has been specially developed to achieve the best results even on non-adjustable angle grinders. Show more Show less

The TYROLIT JUTE disc is a new, unique grinding wheel that combines abrasiveness with a high level of comfort while working thanks to a ceramic grain. The longest lifetime and an environmentally friendly jute fibre core deliver the best performance. An additional back up pad is not required, as there is already one integrated in the product. The natural fibre core can be trimmed, giving it the edge over other discs in terms of its lifetime. This saves the user time and great expense. Show more Show less

The BASIC* belts for the portable belt grinder can be used universally, but are most commonly used on wood. They are suited to this use as they comprise aluminium oxide and polycotton backing. A special grain coating prevents loading of the belts when grinding soft materials, such as wood and paints. This delivers a good grinding power and long lifetime. Simple handling and mounting save extra working time. Show more Show less

With highly flexible cloth rolls from TYROLIT you can machine almost any material. When finishing surfaces, preparation either by hand or using an orbital sander is required. When machining wood, paint and lacquer, TYROLIT recommends BASIC* cloth rolls for hand-guided grinding. For finishing coatings, smoothing and cleaning composites, and for clean intermediate grinding, we recommend cloth rolls on an orbital sander. Show more Show less

The STANDARD** Minidisc was specially developed for machining and refining difficult to access places. Every disc is fitted with a quick fixing system which enables fast and convenient tool changes. The MINIDISC is also a 2in1 rough grinding wheel and is therefore equally suitable for steel and stainless steel. Show more Show less

With the TYROLIT rough cleaning roller for burnishing machines, you can effortlessly remove rust, paint, lacquer and underbody sealant from your workpiece. The porous nylon fibres, treated with aggressive abrasives, meet any challenge. Particularly suitable for cleaning large, even surfaces. At the same time, they prevent clogging or loading. Show more Show less

The MIRA ICE product line has been specially developed for the continuous generating grinding of gears. A new kind of development approach enables unprecedented results to be achieved in terms of economic efficiency and cool grinding.

TYROLIT FAST CHANGE enables you to change a disc very quickly thanks to the Velcro fastening. The thin paper backing makes the disc ideal for finishing various wood surfaces and for preparing paint, lacquer or wax surfaces. The product delivers an exceptionally even finish on lacquers, paints and composites. Clogging and loading of the disc is reduced, thus increasing the product's lifetime. Show more Show less

More than 25 years of experience in hard fine finishing of gears make TYROLIT the market and technology leader in this field. TYROLIT extends the MIRA product assortment for hard fine finishing of gears with the MIRA DDS dressing tools, for dressing in continous generating gear grinding. MIRA DDS dressing tools guarantee best gear qualities and a reproducible work result. Show more Show less

TYROLIT's MIRA DDG has made the company into a market and technology leader in the field of diamond dressing gear production. Honing rings are trued and sharpened during the dressing process. Thanks to their high level of reproducibility and cutting ability, MIRA DDG dressing gears guarantee optimum dressing results, the best possible gearing and surface quality as well as long tool lifetime.

The PREMIUM*** LONGLIFE flap disc offers the longest lifetime and an excellent stock removal rate. This flap disc is used both on high alloyed steels and stainless steel, as well as on unalloyed and low alloyed steels. Problem-free welding as well as edge and surface grinding, particularly when used on powerful angle grinders. Show more Show less

Cup wheels achieve excellent stock removal rates and lifetime for grinding jobs on large areas. The STANDARD** cup wheel for steel and cast steel is ideal for edge grinding, bevelling and grinding welding seams. There is a choice of bore design 22.23 and thread design M14 for fitting to the tool. Observe operating speed: max. 50 m/s Show more Show less

Tool steels display exceptional hardness and strength depending on their intended purpose. The PREMIUM*** mounted points for HSS offer the best prerequisites for machining workpieces up to the lowest tolerance ranges. These tools also strike a perfect balance in terms of chip performance and the intended surface finish. Maximum operating speed: 35 m/s Show more Show less

Wire brushes are universal tools for all applications. Cup brushes in particular are among the most commonly-used brush tools. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less

Wire brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. They are also particularly suitable for cleaning the inside of pipes. Wire brushes with silicon carbide are very hard and thus enable very high stock removal rates. Their use includes deburring work on various workpieces made of practically any material, such as steel, aluminium, stainless steel, copper, brass, etc. In addition, silicon carbide is used for wood structuring. Show more Show less

High productivity due to optimum torque adjustment. Thanks to optimum torque adjustment, the DME33 is an extremely powerful drill motor providing impressive productivity. The mechanical and electronic overload cut-out and the full metal housing ensure high reliability. Built-in performance and service indicators, as well as the levelling aid, also enable easy operation. The drill motor is available with different drill rig attachments (ModulDrill™ quick clamping system or universal plate). Show more Show less

The PREMIUM*** 1F80 high-performance rough grinding wheel is particularly suitable for universal grinding tasks on hard-to-reach areas. This product has been specially developed for cast iron and is ideal for adding flutes and notches. In addition, the wheel makes light work of rough grinding curved surfaces in cavities and ridges. For diameters above 80 mm, we recommend using a protection cover. Show more Show less

The PREMIUM*** tungsten carbide burr set contains common burrs for nonferrous metal applications. Production on CNC machines results in a highly efficient precision tool that achieves optimum grinding results. With this tungsten carbide burr you can achieve the longest lifetimes when used on practically any material. By choosing the right machine, the correct revolutions per minute and operating speed, and the appropriate cutting and tooth profile, you will pave the way for PREMIUM results. Show more Show less

TYROLIT provides the optimal tools for use on large cut-off machines in trade and industry. These include the STANDARD** cut-off wheel for steel in large diameters. This special tool is ideal for cutting workpieces with large cross-sections. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

With this tool you obtain the ideal solution for stationary cutting of common building materials. This PREMIUM*** cut-off wheel achieves the best results for large cross-sections due to its excellent cutting ability that reduces the work of the operator. As with all TYROLIT PREMIUM*** cut-off wheels, this tool has been optimised to achieve the best possible cutting ability and lifetime. Show more Show less

With the TYROLIT PREMIUM*** polishing paste in different specifications you will achieve the final mirror finish. They can be used to perform precision machining work depending on the desired surface finish. Polishing pastes are available in three specifications. Using the POLISH (white), you will achieve a perfectly smooth finish. A achieve a high-gloss finish we recommend S-POLISH (blue) while the POLISH-NE paste is perfect for nonferrous metals. Show more Show less

With a large distance between the disc and machine, you can machine even surfaces at a low grinding angle. Use our PREMIUM*** JUTE disc accessories to achieve this. The accessories are compatible with all disc diameters.

Due to the hard zirconium used in these PREMIUM*** belts they are ideal for very high pressure and deliver above-average stock removal rates. Active coolants reduce the generation of heat while grinding. This high-performance product equipped with durable polyester backing has been developed for demanding steel and stainless steel applications. These products are mainly used for dry applications. Show more Show less

With flexible cloth rolls from TYROLIT you can machine almost any material. When finishing surfaces, preparation either by hand or using an orbital sander is required. When machining wood, paint and lacquer, TYROLIT recommends BASIC* cloth rolls for hand-guided grinding. For finishing coatings, smoothing and cleaning composites, and for clean intermediate grinding, we recommend cloth rolls on an orbital sander. Show more Show less

With the flexible cloth sheets from TYROLIT you can machine almost any material. When finishing surfaces, preparation either by hand or using an orbital sander is required. When machining wood, paint and lacquer, TYROLIT recommends BASIC* cloth sheets. However, our products can also be used for finishing coatings, or smoothing and cleaning composites. Show more Show less

TYROLIT FAST CHANGE enables you to change a disc very quickly thanks to the Velcro fastening. The thin paper backing makes the disc ideal for finishing tasks. The product delivers an exceptionally even finish on metals, lacquers, composites, marble and stone. The product delivers an exceptionally even finish on hard stone, steel and composites. Clogging and loading of the disc is reduced, thus increasing the product's lifetime. Show more Show less

For us, the STANDARD** SOFTJOB Q-Disc represents maximum flexibility for machining difficult to access areas. It has a broad application area, comprising: Surface preparation and improvement, preparation of welding work and cleaning of weld seams, processing of contours and profiled surfaces, processing of handrails and pipes, cleaning of surfaces, removal of rust and paint residues. Show more Show less

These Velcro fastenable ceramic polishing pads are ideal for polishing stone surfaces. With the POLISTAR set, you receive 7 pads in grit sizes of 50, 150, 300, 500, 1000, 2000 and 3000, as well as a supporting disc with an M14 mounting. With the PREMIUM*** POLISTAR pads, you can achieve the best results on granite, marble and terrazzo. Show more Show less

At the forefront of technology: TYROLIT is one of the first abrasive manufacturers to integrate Bosch’s new mounting system X-LOCK for a broad assortment of cutting discs, grinding wheels and flap discs.The new system for angle grinders makes it incredibly easy to change accessories. Safer working: The new clamping system offers no room for mistakes, making X-LOCK the safest clamping solution on the market. Show more Show less

Over 25 years of experience in gear honing make TYROLIT the market and technology leader in its field. Now, more than ever, the MIRA REX product line has made it possible to provide the optimum technical solution for high-efficiency honing. The continuous further development of specifications regarding hardness and cutting ability guarantees maximum honing performance and long dressing cycles.

The DME52UW is a powerful, water-cooled 3-phase drill motor. The DME52UW is a powerful, water-cooled 3-phase drill motor. Its 5.2 kW of power in combination with the oil-bath lubricated gearbox, provide optimum torque and rotation speed for a high drilling performance up to a maximum diameter of 500 mm. Full metal housing, overload clutch and motor thermal protection as well as IP 55 protection class guarantee maximal reliability. LED performance indicator, Softstart and antifriction-element ensure user friendly operation. Show more Show less

Over 25 years of experience in gear honing make TYROLIT the market and technology leader in this field. With the addition of the MIRA REX VTEC to the product range, we have succeeded in developing technically optimised and adapted honing rings for use with the VSD dressing system. The MIRA REX VTEC honing wheels are available in three different specifications: MIRA REX VTEC-20 standard quality MIRA REX VTEC-30 premium quality MIRA REX VTEC-40 high premium quality Show more Show less

With the MIRA BG product line, TYROLIT offers an optimum solution for grinding bevel gears. More stringent quality requirements make hard finishing by grinding increasingly necessary.

The PREMIUM*** FASTCUT is synonymous with excellent, specific abrasion of material. As a result, you will achieve your goal faster, and the disc will remain easy cutting and abrasive over its entire lifetime. The TYROLIT FASTCUT flap disc is the perfect tool for demanding grinding jobs, such as edge grinding and welding. It is used both on high alloyed steels and stainless steel, as well as on unalloyed and low alloyed steels. The additional TOP SIZE coating provides cool grinding. It is also possible to use it on aluminium, to a limited extent. Show more Show less

Cup wheels achieve excellent stock removal rates and lifetime for grinding jobs on large areas. The stone cup wheel is particularly suitable for pre-grinding imperfections on concrete surfaces, bevelling and pre-grinding artificial stone and patio slabs, surface grinding on marble, slate and granite. There is a choice of bore design 22.23 and thread design M14 for fitting to the tool. Observe operating speed: max. 50 m/s Show more Show less

The PREMIUM*** ceramic mounted point set contains all the common mounted points for working on steel, including a roughing stone. The points provide the longest possible lifetime for deburring, bevelling and edging work. These tools also strike a perfect balance in terms of chip performance and the intended surface finish. Show more Show less

PREMIUM*** cup brushes with brass wire are ideal for machining nonferrous metals. Due to its hardness, the brass wire achieves the best results on the brass workpiece. Their knotted wire design enables them to easily remove paint, dirt and varnish. They are ideal for fine work and thus make working on nonferrous metals easier. Show more Show less

Shaft mounted cup brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Knotted shaft mounted cup brushes are suitable for cleaning work, such as removing paint, rust, scale, crust, or deburring. Show more Show less

Quick and easy drilling of large and deep bores. In accordance with the TYROLIT modularity principle, the DGB1000 delivers optimum rotational speeds and impressive performance in conjunction with either the electric high-frequency motor or hydraulic standard motor options, by means of 8 transmission stages – two speeds at the drilling gear box and up to four stages via the relevant drive. With optimised drill bit attachment for large diameters and high torques. Show more Show less

These accessories are suitable for clamping all rough grinding wheels available in the TYROLIT assortment for straight grinders. Please observe the maximum permissible speed.

The super-thin PREMIUM*** cut-off wheel has been specially designed for battery-powered angle grinders and enables smaller repairs to be carried out without requiring a power source. This therefore makes it considerably easier to use on scaffolding, in difficult-to-reach terrain or workplaces. These products have been optimised for battery-powered angle grinders and are ideal for cutting thin-walled metal sheets, profiles and pipes. They also make light work of machining small cross-sections, rods and reinforced steel. Show more Show less

Despite extreme application conditions, such as humidity, cold and temperature fluctuations, the stone cut-off wheel from TYROLIT offers reduced cutting times coupled with minimal effort. Clean, non-discoloured surfaces reduce reworking tasks and working times. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

TYROLIT provides the optimal tools for use on stationary cutting machines in chop cut. This special tool is ideal for cutting workpieces with large cross-sections, as well as solid material and profiles. The internal reinforcement and rough side surfaces enable low burr cutting of workpieces. As with all TYROLIT STANDARD** cut-off wheels, this tool has been optimised to achieve excellent cutting ability and lifetime. Show more Show less

With the TYROLIT POLISHING PROGRAM you can achieve the perfect high gloss surface in just a few steps. Preventing clogging of the wheels provides an above-average lifetime. Exceptionally cool grinding due to special flaps ensures outstanding surface finishes. Exceptionally high levels of work safety due to low heat build-up, minimal formation of dust and quiet operation. Show more Show less

Using fibre discs is a very simple and quick solution for removing material. A low level of vibration means the tools are convenient to use. This fibre disc has been designed for use on steel and is made of a zirconium aluminium oxide mix. This fibre disc is available from our assortment in grit sizes 24 to 120. Show more Show less

Our back up pads can be used on most dual action sanders and their medium density provides the ideal support for finishing and preparing surfaces. The specially developed product design delivers outstanding dust extraction. You can use practically any disc with our back up pads. They fit discs with 0, 6, 7, 9 and 15 holes. Show more Show less

With TYROLIT QUICK CHANGE DISCS you can save time and increase productivity. They provide easy handling and can be used without the need for any additional mounting tools. Our QUICK CHANGE DISC assortment includes discs for general grinding tasks on any material. Our two different types cover the main mounting systems. Show more Show less

With highly flexible cloth sheets from TYROLIT you can machine almost any material. When finishing surfaces, preparation either by hand or using an orbital sander is required. When machining wood, paint and lacquer, TYROLIT recommends the BASIC* cloth sheets. However, our products can also be used for finishing coatings, or smoothing and cleaning composites. Show more Show less

Belts with self-sharpening ceramic grain offer a high stock removal rate on steel and stainless steel. Thanks to this self-sharpening effect, an even surface quality is achieved over the entire lifetime of the abrasive belts. Moreover, the composition of the abrasive belt reduces effort for the operator as less pressure is required. Show more Show less

Over 25 years of experience in gear honing make TYROLIT the market and technology leader in this field. With the new 2-zone composite design MIRA REX COMP range, we have succeeded in developing technically optimised and adapted honing wheels for power honing. . The abrasive inner ring is produced using vitrified bonding. The outer ring is made of an PU bonding without abrasive grains. A patent application was filed for this innovative honing wheel design. Show more Show less

The MIRA ICE product line was developed in collaboration with experienced TYROLIT experts, especially for the grinding of large gears. A new kind of development approach enables previously unknown results to be achieved in terms of economic efficiency and cool grinding. MIRA ICE has been further optimised on the basis of the leading product line from BURKA-KOSMOS and sets new standards throughout the industry.

The PREMIUM*** OVERLAP is the right tool to effortlessly access hard-to-reach areas. Its flaps overlap by about 10 mm and make light work of the finishing of fillet welds, grooves and flutes. The OVERLAP flaps also impress in terms of stock removal rate and lifetime when used on steel and stainless steel. Show more Show less

With the PREMIUM*** 3in1 rough grinding wheel with zirconium aluminium oxide you can impress on three levels. High performance on steel, stainless steel and cast materials, as well as chemical purity distinguish the product. This tool does not contain iron, sulphur, chlorine and fluorine, and leaves workpiece surfaces in a neutral condition. The abrasiveness and long lifetime enable high stock removal rates within the shortest possible time. Thanks to its chemical purity; free of iron, sulphur, chlorine and fluorine, the wheel is particularly suited to special application areas such as nuclear power stations. Show more Show less

Coordinated light grey bond systems enable the ELASTIC mounted points to be put to both universal use and use tailored to the application. The assortment includes soft elastic points for curved surfaces and medium elastic points for straight surfaces. Our range also includes fewer elastic points for working at higher speeds and mottling points for mottling surfaces. Maximum operating speed: BE13: 16 m/s; BE15: 20 m/s; BE16: 32 m/s. Show more Show less

These PREMIUM*** wire brushes are particularly suitable for machining hard-to-reach parts due to their shape. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less

Shaft mounted cup brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Knotted shaft mounted cup brushes are suitable for cleaning work, such as removing paint, rust, scale, crust, or deburring. Show more Show less

Quick and easy drilling of large and deep bores. In accordance with the TYROLIT modularity principle, the DGB1000 delivers optimum rotational speeds and impressive performance in conjunction with either the electric high-frequency motor or hydraulic standard motor options, by means of 8 transmission stages – two speeds at the drilling gear box and up to four stages via the relevant drive. With optimised drill bit attachment for large diameters and high torques. Show more Show less

Using newly developed technology and new materials we have succeeded in taking another step towards improved user safety. The PREMIUM*** cut-off wheel with DEEP Cut Protection enables the user to achieve maximum insertion depths into the workpiece without damaging the wheel. There is no risk of sharp workpiece edges removing the crown. Show more Show less

The technology from TYROLIT makes it possible to use two external reinforcements for cutting solid material and large cross-sections. This STANDARD** cut-off wheel achieves the best results due to its excellent cutting ability that reduces the work of the operator. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

This special tool is ideal for cutting workpieces with large cross-sections, as well as solid material and profiles. The internal reinforcement and rough side surfaces enable low burr cutting of workpieces. As with all TYROLIT BASIC* cut-off wheels, this tool has been optimised to achieve excellent cutting ability and lifetime. Show more Show less

These Velcro fastenable ceramic polishing pads are ideal for polishing stone surfaces. The grit sizes available in the assortment, from 50 to 3000, ensure a perfect surface finish on the material. With the PREMIUM*** POLISTAR pads, you can achieve the best results on granite, marble and terrazzo. Show more Show less

Using fibre discs is a very simple and quick solution for removing material. A low level of vibration means the tools are convenient to use. This fibre disc has been designed for use on steel and stainless steel, and is made of a zirconium aluminium oxide mix. This fibre disc is available from our assortment in grit sizes 24 to 120. Show more Show less

With the new TYROLIT SCM program, we are now taking a further step towards economic efficiency. Simple handling and mounting save you time. With SCM, the machining time of the workpiece can now be greatly reduced. A saving of one to three work steps is thus the key benefit. Thanks to the quick and high stock removal rate, applications such as the reduction of surface roughness, removal of discolouration, smoothing of surfaces and the cleaning and removal of weld seams can be realised. Show more Show less

Our fleece sheets are used for cleaning and processing surfaces using orbital sanders or for hand-guided grinding. A wide range of specifications offer the user a variety of surface finish options. The assortment extends from coarse specifications for cleaning weld seams through to ultra-fine and polishing fleece. Show more Show less

TYROLIT fleece rolls are used for cleaning and processing surfaces using orbital sanders or for hand-guided grinding. A wide range of specifications offer the user a variety of surface finish options. The assortment extends from coarse specifications for cleaning weld seams through to ultra-fine and polishing fleece. Show more Show less

Tyrolit redefines CNC profiling wheels for stone fabrication Tyrolit has revolutionized the production of its CNC profile wheels in order to offer fabricators a boost in performance. Show more Show less

The ideal core drill entry model. The DRS162 drill system is the ideal core drill entry model. The drill motor and drill rig complement each other perfectly and form a single unit. The preset speed and compact, lightweight construction guarantee easy handling and user-friendliness. An integrated PRCD safety switch ensures maximum safety. Show more Show less

The DRS250 drilling system combines simplicity with a large drill diameter range. The DRS250 drilling system combines simplicity with a large drill diameter range. The drill motor and drill rig complement each other and form a single unit. 2-speed oil bath gearbox insures perfect lubrication in all working positions, as well as optimal torque-to-speed ratio. Compact and lightweight construction guarantees easy handling and user-friendliness. Mechanical overload clutch and integrated PRCD safety switch ensure maximum safety. Optional vacuum plate offers more flexibility in fixing the system. Show more Show less

With the GENIS 2 product line, TYROLIT defines a new performance level and a wider range of applications for external cylindrical grinding with vitrified-bonded CBN tools. GENIS 2 is characterised by a high-strength bond with excellent moistening properties, which securely binds the CBN grain. Low bond volumes enable very porous, cool-grinding and extremely easy-cutting specifications with a long lifetime. Show more Show less

Following intensive research, TYROLIT has succeeded in developing GENIS - a bond system that ensures optimum wetting and coating of the CBN grain, even with extremely low bond content. By selecting the composition of the bond, at the right firing conditions crystallisation is controlled in a targeted manner. This enables the production of porous textures with high mechanical strength, which feature maximum resistance to the effect of cooling lubricants. The cool grinding specifications of our GENIS highest performance tools enable you to purposely reduce grinding forces and so make the most efficient use of the CBN grain. In all applications, practical experience shows that reduced grinding forces enable minimal wear and maximum profile retention. Show more Show less

The PREMIUM*** 2in1 flap disc combines an excellent lifetime with very high specific abrasion. The TYROLIT 2in1 flap disc is used both on high alloyed steels and stainless steel, as well as on unalloyed and low alloyed steels. Problem-free welding as well as edge and surface grinding, particularly when used on powerful angle grinders. Show more Show less

The high-performance rough grinding wheel has been specially designed for stainless steel applications. The PREMIUM*** INOX rough grinding wheel combines a long lifetime and the best cutting ability. To achieve this a special mixture of regular aluminium oxide and zirconium aluminium oxide is used. This rough grinding wheel is specially designed for stainless steel applications. Show more Show less

These PREMIUM*** wire brushes are particularly suitable for machining hard-to-reach parts due to their shape. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less

Shaft mounted cup brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Knotted shaft mounted cup brushes are suitable for cleaning work, such as removing paint, rust, scale, crust, or deburring. Show more Show less

Ideal for electrical and installation work. The DRA150 is extremely well-suited for electrical and installation work. This drill rig is suitable for 550 mm drill bits and angle drilling. A centre indicator, spirit level and carrying handle facilitate handling. Show more Show less

This PREMIUM*** cut-off wheel reduces the work of the operator due to its excellent cutting ability. When used on tiles, ceramics, clinker and nonferrous metals, the wheel impresses by achieving clean cutting edges and excellent cutting quality. Machine wear is significantly reduced by low wheel thicknesses. The advantages are topped off by its environmentally-friendly operation, thanks to the reduction in cutting waste. Show more Show less

The BASIC* cut-off wheel for steel is suitable for cutting profiles, solid material and large cross-sections due to its design with two external reinforcements. With the BASIC* wheel, you can achieve reduced cutting times coupled with minimal effort. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

Using fibre discs is a very simple and quick solution for removing material. A low level of vibration means the tools are convenient to use. This fibre disc has been designed for use on steel and stainless steel, and is made of a ceramic aluminium oxide mix. This fibre disc is available from our assortment in grit sizes 24 to 120. Show more Show less

With the TYROLIT rough cleaning wheel for mini angle grinders you can effortlessly remove rust, paint, lacquer and underbody sealant. The porous nylon fibres, treated with aggressive abrasives, meet any challenge. At the same time, it prevents smearing and loading of the disc. This wheel offers the user quiet, non-strenuous grinding coupled with low generation of heat. Show more Show less

With GENIS CF, TYROLIT is extending the performance spectrum of the GENIS product line with an innovative, fibre-reinforced composite core for numerous external cylindrical grinding applications. In addition to a weight reduction of up to 80%, this tool design features special damping characteristics, which result in improved grinding results and a longer lifetime.

The PREMIUM*** COMBI combines abrasive cloth and fabric in one tool. This enables two work steps to be performed in one. Material removal and simultaneous finishing of surfaces produce an optimal result. The long lifetime of the PREMIUM*** COMBI dramatically increases economic efficiency in comparison to conventional “surface conditioning” discs. The disc has also been specially developed to achieve good results at high speeds on non-adjustable angle grinders (max. 80 m/s). Show more Show less

The vibration damping developed and patented by TYROLIT allows professional users to achieve exceptionally gentle grinding. The multi-layer structure and the permanently attached plastic flange reduce vibrations by up to 50%. The PREMIUM*** Vibstar technology helps to prevent occupational illnesses, such as muscular and skeletal damage, and neurological illnesses and circulatory problems, such as vibration white finger. This rough grinding wheel is specially designed for stainless steel applications. Show more Show less

The PREMIUM*** round brushes are ideal for welding. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less

Shaft mounted cup brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Shaft mounted cup brushes with silicon carbide are very hard and thus enable very high stock removal rates. Their use includes deburring work on various workpieces made of practically any material, such as steel, aluminium, stainless steel, copper, brass, etc. In addition, silicon carbide is used for wood structuring. Show more Show less

Lightweight under the drill rigs up to Ø 160 mm. The DRU160 is the lightweight among drill rigs up to Ø 160 mm. The standardised clamping collar system enables quick mounting of common drill motors. In addition, a centre indicator, angle indicator and spirit level enhance user-friendliness and help save valuable time during drill rig set-up. The anchor or vacuum attachment facility also increase flexibility. Show more Show less

The CERABOND bond system developed by TYROLIT combines an easy cutting ceramic grain with a unique bond structure. This prevents premature break-out of the grain and increases the abrasiveness many times over. The CERABOND cut-off wheel range is particularly suitable for optimum machining of extremely hard, sophisticated workpieces and solid materials. The range stands for a long lifetime and shorter working processes with maximum economic efficiency. Through the introduction of the 1.0 mm cut-off wheel with CERABOND system, the product family has been extended by a powerful member. The CERABOND product line has thus been completed and is now available in the specialist retail worldwide Show more Show less

The technology from TYROLIT makes it possible to use two external reinforcements for cutting solid material and large cross-sections. The BASIC* cut-off wheel therefore offers good stability and cutting ability, reducing the work of the operator. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

These accessories enable QUICK CHANGE DISCS to be easily and safely mounted on your mini angle grinder. The accessories are available in the common sizes of 50 and 75 mm diameter.

With the ELASTIC RONDELLER® TYROLIT provides an ideal tool for polishing and finishing. Thanks to the highly elastic grinding layer a surface improvement is achieved while protecting the material. Using a fibre glass core means it can be used on speed-controlled angle grinders. Ideally suited to work on vehicles, containers and aeroplanes. Show more Show less

With belts from the TYROLIT SCM range, TYROLIT is taking another step towards economic efficiency. The machining time of the workpiece can now be greatly reduced. A saving of one to three work steps is thus the key benefit. Thanks to the quick and high stock removal rate, applications such as the reduction of surface roughness, removal of discolouration, smoothing of surfaces and the cleaning and removal of weld seams can be realised. In addition, the TYROLIT SCM range boasts the best results in terms of lifetime. Show more Show less

Thanks to the self-sharpening ceramic abrasive grain, the PREMIUM*** CERAMIC flap disc is particularly suitable for stainless steels and demanding grinding applications. The additional TOP SIZE coating ensures cool grinding, allowing a longer tool lifetime and reducing discolouration on the workpiece surface. Thanks to the self-sharpening characteristic of the abrasive grain, a more even surface quality is achieved over the entire lifetime of the disc. Show more Show less

The PREMIUM*** Silentio sets new milestones in terms of noise reduction. With a reduction of 10 decibels, noise perception is minimised by 50%. This increases the user's level of comfort while working, avoiding lasting physical harm. This rough grinding wheel with a unique wheel shape has been specially designed for stainless steel applications. Show more Show less

The PREMIUM*** round brushes are ideal for welding. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less

Shaft mounted round brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Knotted wire brushes are suitable for removing rust, cleaning, smoothing, polishing, matting and roughening. Twisted shaft mounted round brushes are designed for welding and removing scale and paint. Show more Show less

Impressive stability and drilling performance with sturdy processing and robust drilling columns - wide gear teeth. The DRA250 | DRU250 drill rigs offer impressive stability and drilling performance thanks to sturdy workmanship and robust drilling columns with wide gear teeth. The optimised support with sturdy roller guide guarantees precise drilling. The proven ModulDrill™ quick clamping system enables fast and secure mounting of drill motors. In addition, a centre indicator (DRU250), angle indicator and two-speed feed gear enhance user-friendliness and help save valuable working time. The compact lightweight construction for easy transport, assembly and disassembly complete the system. Show more Show less

In standard widths, this high-performance tool not only offers a cost-efficient solution, but also the highest safety standards. This is provided by the longest lifetime and stability of the PREMIUM*** LONGLIFE. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. The assortment of LONGLIFE cut-off wheels ranges from 1.6 to 1.9 mm for quick and convenient operation with the longest lifetime, and from 2.5 to 3.0 mm for the longest lifetime and stability. Show more Show less

Using fibre discs is a very simple and quick solution for removing material. A low level of vibration means the tools are convenient to use. This fibre disc has been designed for universal use and is made of an aluminium oxide mix. This fibre disc is available from our assortment in grit sizes 16 to 120. Show more Show less

Thanks to the highly elastic grinding layer the TYROLIT ELASTIC RONDELLER® delivers a surface improvement while protecting the material. This tool is therefore ideal for polishing and finishing. The specially developed specification delivers the best results on lacquers, paints and plastics. Using a fibre glass core means it can be used on speed-controlled angle grinders. Ideally suited to work on vehicles, containers and aeroplanes. Show more Show less

The BY dual rod drill rig combines a lightweight design with great stability. The BY dual rod drill rig combines a lightweight design with great stability. The accurate guide principle enables inclined drilling at any angle. This particularly compact core drill rig can be combined with a wide range of electric drilling motors. Thanks to its modular design, the drill rig can also be used for more powerful hydraulic drilling operations. Show more Show less

With the STARTEC XP-P+ product line, TYROLIT defines a new performance level for the flute grinding of tungsten carbide cutting tools. Two different diamond qualities and the innovative bond structure lead either to significantly reduced grinding forces or to a major increase in profile retention. The precision of the machined tools remains at the usual high level.

Easiest drilling of bores in walls, ceiling and floors thanks to intelligent design with drilling and gripping column that can be rotated by 360°. Thanks to its intelligent design with drilling and gripping column that can be rotated by 360°, the DRU350 enables the drilling of holes in walls, ceilings and floors. The drill rig can be mounted in a time saving and material protecting manner via an innovative telescope clamping system. Various settings options, an extended drilling column and a variety of drill accessories ensure universal use. Show more Show less

With the STARTEC HP product line, Tyrolit was already able to satisfy performance and quality requirements in the past. The STARTEC XP-P line now offers improved profile retention and low power consumption during the manufacture of tools made of HSS and HM. State-of-the-art raw material combinations and tried and tested production sequences make sure our customers enjoy tools of optimum quality.

The professional core drilling system for the most versatile fields of application. DRA400 and DRU400, the professional core drilling systems for a versatile application range. The optimised support with sturdy roller guide guarantees precise drilling. The proven ModulDrill™ quick clamping system enables fast and secure mounting of drill motors. In addition, a centre indicator, angle indicator and two-speed feed gear enhance user-friendliness and help save valuable working time. The compact lightweight construction for easy transport, assembly and disassembly complete the system. Show more Show less

STARTEC XP-P from TYROLIT is a byword for maximum efficiency and optimum tool quality in flute grinding. The product range will be expanded in future to include new shapes and specifications for machining clearance surfaces and face geometries on tungsten carbide stock-removal tools. An innovative bond system, tailored diamond qualities and new manufacturing technologies guarantee extremely high edge stability, low cutting forces and the best surface finish on the ground tool.

Maximum stability and drilling performance for the highest demands. The DRA500, a drill rig for maximum stability and the highest demands during drilling. The proven ModulDrill™ quick clamping system enables fast and secure mounting of drill motors. Thanks to an extended drilling column, even long through-holes can be made with ease. Thanks to the modular design, combined use with TYROLIT cable saws and hydraulic equipment is possible without difficulty. Show more Show less

With the STARTEC PG-1 product line, for the first time TYROLIT is offering innovative roughing and finishing wheels for the peel grinding of tungsten carbide tool blanks in particular. A high-strength metal bond is used for the roughing wheel. This enables especially cost-effective and reliable process control. Long-life vitrified or metal bonds are used for the finishing wheel. This enables even large stock removal fluctuations to be compensated after roughing, and maximum surface quality to be achieved.

Cost-effective drilling with hydraulic drill and feed motor. The DRA500, a drill rig for maximum stability and the highest demands during drilling. The proven ModulDrill™ quick clamping system enables fast and secure mounting of drill motors. Thanks to an extended drilling column, even long through-holes can be made with ease. Thanks to the modular design, combined use with TYROLIT cable saws and electric equipment is possible without difficulty. Show more Show less

System solutions comprising high-precision grinding tools and specially designed dressing wheels make up the STARTEC MT-1 product line from TYROLIT. Bespoke diamond qualities and an innovative bond structure ensure low grinding forces and particularly high cutting efficiency during the grinding process. Minimal reject-part rates and optimum ground tool quality are the result.

Perfect for drilling large bores. The BC-2 is ideal for drilling large holes up to 1 000 mm. Thanks to the modular design, combined use with TYROLIT cable saws and hydraulic equipment is possible without difficulty. The dual-column guidance principle and a two-speed feed gear enable user friendly work and low weight. A large selection of drill accessories rounds off the range. Show more Show less

Tyrolit is the market and technology leader in the field of high-porosity grinding wheels for creep feed grinding. With the STRATO product line, TYROLIT is setting new standards of quality and performance. It has now launched STRATO-ULTRA, representing the next generation of surface and creep feed grinding tools. Particularly in the turbine industry, STRATO ULTRA can be used instead of grinding tools with expensive sintered aluminium oxides without sacrificing performance. Sintered aluminium oxide reacts very aggressively to the dressing tool and consequently generates increased diamond wear. TYROLIT offers its customers profiled grinding tools. Depending on the profile depth, simple edge profiles and customised pre-profiling can significantly reduce set-up times (pre-profiling times) and associated dressing tool wear. Show more Show less

Cost-effective drilling with hydraulic drill and feed motor. The BC-2 is ideal for drilling large holes up to 1 000 mm. Thanks to the modular design, combined use with TYROLIT cable saws and electric equipment is possible without difficulty. The dual-column guidance principle and a two-speed feed gear enable user friendly work and low weight. A large selection of drill accessories rounds off the range. Show more Show less

With VIPER ULTRA, TYROLIT is setting a new benchmark in the field of creep feed grinding. The improved bonding of the grain and precisely controlled wetting enable the patented VIPER ULTRA bond system to coat the surface of the grain and so greatly improve grain bonding.

With its CENTURIA product line, Tyrolit offers a complete range of conventional, resin-bonded tools for surface grinding. Different face grinding methods are used for rational production of functional surfaces with high requirements relating to evenness, plane parallelism and surface finish. Either both faces are machined simultaneously (double side face grinding), or just one face is machined using single wheels, segments, rings or cups. The components are often manufactured in mass production, which means that there are high requirements with respect to process stability. Show more Show less

With the CENTURIA M, and MP product lines, Tyrolit produces special products for the surface grinding of taper rollers. These cup wheels are manufactured in a multi-zone design, so that the pre-grinding and finish grinding can be carried out efficiently in one operation. The coarser inner zone ensures a high stock removal rate, the fine outer zone ensures a very low surface roughness on the flat surface of the taper rollers. Show more Show less

COLUMBIA grinding wheels from TYROLIT bridge the technological gap between grinding tools made of fused aluminium oxide and superabrasives. For internal cylindrical grinding applications, in particular, these products of specially bonded sintered aluminium oxide develop their full potential and make possible previously unparalleled levels of performance.

TYROLIT has developed a new generation of grinding wheels with a CBN layer and an innovative core for grinding rolls used in cold rolling mills. The GENIS ROLL STAR enables the cost-effective machining of ultra-hard rolls thanks to shorter grinding times and higher-quality surface results. The newly developed core of the GENIS ROLL STAR is vibration-damped and can be disposed of once the grinding layer is worn down. Show more Show less

The rolls must be continually reground due to fire cracks, wear and peeling of the roll surface. Roll grinding is a special form of external cylindrical grinding. It is used in sheet mills and in roll production. With the CSS-RS, TYROLIT offers the optimum grinding tool for this application.

Our "roll pass" for grinding rod mills is called CSS WIRE ROLL – currently the best solution on the market. It is also a fully integrated system solution, including tools for re-trueing the grinding wheel and roughing stones for exposing the abrasive grain.

With a grinding wheel, regulating wheel and dressing tool, TYROLIT offers the complete range. By continually further developing our products, we can guarantee the best stock removal per grinding pass, the strictest tolerances and finest surfaces.

Through the use of centreless grinding in through-feed and plunge cut grinding, round components can be produced with particular precision and efficiency. Here, the regulating wheel controls the grinding process and therefore has a decisive influence on the quality of the produced components. The CSS REGULATOR from TYROLIT is manufactured as a unitised version. The extremely high compaction ensures uniform quality of the regulating wheel. Show more Show less

With CSS ULTRA, TYROLIT has managed to restructure the micro-architecture of the grinding wheel with lasting effect by using high quality components and innovative sintering technology. This enables the abrasive grain to withstand much greater loads during use without breaking away prematurely. These improvements result in maximum profile retention combined with minimal wear.

Grinding tools specially developed for knife grinding , hollow grinding and back grinding. COOL CUT is suitable for cutting tools of all kinds: forged or stamped kitchen knives and pen knives, scalpels and razor blades, lawn and gardening shears, paper knives.

Resin-bonded grinding tools for the grinding, sharpening and polishing of cutting tools, such as scalpels and scissors.

"During the grinding process, all the work is performed by the abrasive grain." This central guiding principle has significantly shaped the development of the SKYTEC XD-1.The SKYTEC XD-1 product line impresses through a particularly high proportion of diamond grain, embedded in a specially developed bond. This results in excellent grinding performance and a long tool life. Show more Show less

TYROLIT offers the innovative SKYTEC BASIC+ product line for the economical production of PCD and PCBN cutting inserts. This proven series stands for precision geometry and minimal cutting-edge chipping. A bond system with increased porosity forms the centrepiece of this solution. Show more Show less

The innovative SKYTEC BOLT metal bond was specially developed for the patented Agathon PowerGrind process. Spark erosion enables the grinding wheel to be continuously and simultaneously dressed, sharpened and cleaned during the grinding process. The maximum chipping space and the permanent, easy cutting grinding wheel topography of the SKYTEC BOLT enable tool inserts to be machined with maximum economic efficiency.

The SOLOTEC product line from TYROLIT offers the perfect solution for the peripheral grinding of cutting inserts made from tungsten carbide and cermet. A range of newly developed bond systems with optimised strength and increased brittleness is used. When combined with new diamond qualities, the result is efficient grinding tools that improve the grinding process while simultaneously improving workpiece quality.

Drill motors up to 3 kW | soft to medium-hard concrete aggregates. Quality tools for the most demanding applications and maximum economic efficiency. Excellent and consistent performance, universal use and smooth core removal. Segmented drill from Ø 47 mm with TGD®-technology and new segment height of 11.3 mm. Laser welded segments up to a Ø 250 mm for maximum safety.

For grinding the chip flute, the focus is on precise geometry and optimum hardness of the tool's cutting edge. With tried and tested flute grinding wheels from TYROLIT, these requirements are perfectly satisfied thanks to maximum stock removal rates and cool grinding. The result is significantly lower machining costs and enhanced workpiece quality.

Drill motors up to 3 kW | soft to medium-hard concrete aggregates. Quality tools for the most demanding applications and maximum economic efficiency. Excellent and consistent performance, universal use and smooth core removal. Segmented drill from Ø 82 mm with TGD®-Technology and new segment height of 11.3 mm. Laser welded segments up to a Ø 250 mm for maximum safety.

Drill motors over 3 kW | medium-hard to hard concrete aggregates. Quality tools for the most demanding applications and maximum economic efficiency. Excellent and consistent performance, universal use and smooth core removal. Segmented drill from Ø 82 mm with TGD®-technology and new segment height of 11.3 mm. Laser welded segments up to a Ø 250 mm for maximum safety.

Honing and superfinishing stones are made from conventional abrasives (aluminium oxide and silicon carbide) as standard. However, Tyrolit also produces these tools using superabrasives (diamond and CBN). Honing and superfinishing is used on components with especially high demands concerning the surface finish and geometry. The demands on the honing and superfinishing stones are also correspondingly high. Show more Show less

Open-pore grinding tools for machining base surfaces. The special feature is the machining of plastic coatings and steel edges in one operation. Grinding wheels also produce a considerably flatter coating surface (base surface) than an abrasive belt.

Drill motors over 3.5 kW. Hard to very hard concrete aggregate. Quality tools for the most demanding applications and maximum cost efficiency. Universal use and smooth core removal. New segment height of 11.3 mm for a long lifetime. Laser-welded segments up to Ø 250 mm for maximum safety.