PREMIUM*** cut-off wheels

for stainless steel

The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The PREMIUM*** cut-off wheel in small diameters is designed for use on straight grinders. This tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. Show more Show less

  • The chemical purity of the product prevents corrosion, pitting corrosion and reduction in fatigue strength for the best results on stainless steel
  • Particularly thin and fine-grained wheels allow short cutting times and fatigue-free working
  • Ideal for machining hard-to-reach areas
  • Particularly impressive because of their long lifetime and simple, accurate handling

PREMIUM*** ACCU cut-off wheels

for steel and stainless steel

The super-thin PREMIUM*** cut-off wheel has been specially designed for battery-powered angle grinders and enables smaller repairs to be carried out without requiring a power source. This therefore makes it considerably easier to use on scaffolding, in difficult-to-reach terrain or workplaces. These products have been optimised for battery-powered angle grinders and are ideal for cutting thin-walled metal sheets, profiles and pipes. They also make light work of machining small cross-sections, rods and reinforced steel. Show more Show less

  • Work on smaller tasks in hard-to-reach areas without the need for a power source, while still benefiting from the usual TYROLIT quality
  • Tool can be used for a wide variety of applications on steel and stainless steel
  • Also makes light work of small cross-sections, rods and reinforced steel

PREMIUM*** DEEP CUT PROTECTION cut-off wheels

for steel and stainless steel

Using newly developed technology and new materials we have succeeded in taking another step towards improved user safety. The PREMIUM*** cut-off wheel with DEEP Cut Protection enables the user to achieve maximum insertion depths into the workpiece without damaging the wheel. There is no risk of sharp workpiece edges removing the crown. Show more Show less

  • The metal bushing with DEEP CUT PROTECTION prevents bore breakout
  • Maximum insertion depths into the workpiece and contact with sharp workpiece edges possible without damaging the wheel
  • DEEP CUT PROTECTION is a further step towards operator safety
  • High level of comfort thanks to easy-cutting specification

PREMIUM*** CERABOND cut-off wheels

for steel and stainless steel

The CERABOND bond system developed by TYROLIT combines an easy cutting ceramic grain with a unique bond structure. This prevents premature break-out of the grain and increases the abrasiveness many times over. The CERABOND cut-off wheel range is particularly suitable for optimum machining of extremely hard, sophisticated workpieces and solid materials. The range stands for a long lifetime and shorter working processes with maximum economic efficiency. Through the introduction of the 1.0 mm cut-off wheel with CERABOND system, the product family has been extended by a powerful member. The CERABOND product line has thus been completed and is now available in the specialist retail worldwide Show more Show less

  • Shorter working processes
  • Improved productivity
  • Lower production costs

FOCUR-EXTRA cut-off wheels

Cutting castings with the angle grinder

FOCUR-EXTRA is tough on every casting challenge. This range was developed specially for the harsh requirements of the foundry industry. With its zirconia alumina combined with new bond systems, it ensures optimum cutting ability, low vibration, a long lifetime and the best price-performance ratio for your cutting process.

  • Less effort required through high cutting ability
  • Clean cutting quality
  • Long lifetime
  • Produced according to stringent quality standards
  • Ultimate product safety

FOCUR SA

Diamond cut-off wheel for grey and spheriodal cast iron

FOCUR SA diamond cut-off wheels from TYROLIT are the optimum tool for machining grey and spheroidal cast iron. These products combine a long lifetime with maximum economic efficiency. FOCUR SA cut-off wheels are available in diameters from 178 to 600 mm.

  • Lifetime
  • Economic efficiency
  • Working convenience
  • Quality

PREMIUM*** 2-in-1 cut-off wheels

for steel and stainless steel

This high-performance tool has been designed to be used on both steel and stainless steel and its standard widths offer a cost-efficient solution. This is provided by the longest lifetime and stability of the PREMIUM*** 2in1. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. The assortment of 2in1 PREMIUM*** cut-off wheels ranges from 1.6 to 1.9 mm for quick and convenient operation with the longest lifetime, and from 2.5 to 3.0 mm for the longest lifetime and stability. Show more Show less

  • The chemical purity of the product prevents corrosion, pitting corrosion and reduction in fatigue strength for the best results even on stainless steel
  • Extremely short working times thanks to excellent cutting ability and a low thermal load on the workpiece (heat build-up)
  • High level of comfort thanks to easy-cutting specification

PREMIUM*** cut-off wheels

for stainless steel

The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. The assortment of these cut-off wheels ranges from 1.6 to 1.9 mm for quick and convenient operation with the longest lifetime, and from 2.5 to 3.0 mm for the longest lifetime and stability. Show more Show less

  • The chemical purity of the product prevents corrosion, pitting corrosion and reduction in fatigue strength for the best results on stainless steel
  • Extremely short working times thanks to excellent cutting ability and a low thermal load on the workpiece (heat build-up)
  • Specially for rust-resistant and acid-resistant steels

PREMIUM*** FOCUR Extra cut-off wheels

for cast iron

The PREMIUM*** FOCUR Extra cut-off wheel offers maximum abrasiveness coupled with the best cutting ability. Innovative production technology combined with high-quality zirconium aluminium oxide makes this possible. The assortment of these cut-off wheels ranges from 2.5 to 3.5 mm. This high-performance tool has been developed for use on all cast materials. Show more Show less

  • Maximum abrasiveness coupled with the best wheel life thanks to innovative manufacturing technology
  • New bond system combined with high-quality zirconium aluminium oxide for maximum stock removal
  • Universal use

PREMIUM*** CUT AND GRIND

for steel and stainless steel

With the introduction of the PREMIUM*** CUT AND GRIND it has become possible to perform applications such as grinding, deburring and shaping as well as cutting and plunging with only one tool. TYROLIT has now refined this technology. The wheels now have a thinner width of 2.0 mm and offer additional safety for the user with the new DEEP Cut Protection. The risk of sharp workpiece edges removing the crown from the wheel and the consequent break out of the bore is prevented. Show more Show less

  • Thanks to CUT AND GRIND, applications such as grinding, deburring and shaping as well as cutting and plunging are possible with only one tool
  • Thinner width of 2.0 mm with DEEP CUT PROTECTION offers additional safety for the operator and prevents bore breakout in the event of contact with sharp-edged workpieces
  • Optimal cutting

PREMIUM*** CUT AND GRIND

2in1 for steel and stainless steel

With the introduction of the PREMIUM*** CUT AND GRIND it has become possible to perform applications such as grinding, deburring and shaping as well as cutting and plunging with only one tool. The design of the wheel guarantees the highest performance right from the start without compromising on safety. While it provides versatile application options, the CUT AND GRIND complies with the highest safety standards. Show more Show less

  • Efficient work
  • Universal application options
  • Reduced working times

STANDARD** cut-off wheels

for stainless steel

The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. The assortment of these cut-off wheels ranges from thicknesses of 1.0 to 1.9 mm for fast, convenient and low-burr cutting. The stable cut-off wheels in thicknesses between 2.0 and 2.5 mm have a very long lifetime and are suitable for universal use. Show more Show less

  • The chemical purity of the product prevents corrosion, pitting corrosion and reduction in fatigue strength for very good results on stainless steel
  • Convenient cutting with excellent lifetime
  • Short working times thanks to very good cutting ability and a low thermal load on the workpiece (heat build-up)

BASIC* CUT AND GRIND

for steel and stainless steel

The BASIC* CUT AND GRIND makes it possible to perform applications, such as grinding, deburring and shaping as well as cutting and plunging, with only one tool. The design of the wheel guarantees good performance right from the start without compromising on safety. While it provides versatile application options, the CUT AND GRIND complies with the highest safety standards Show more Show less

  • Thanks to CUT AND GRIND, applications such as grinding, deburring and shaping as well as cutting and plunging are possible with only one tool
  • The product offers good performance with the highest safety standards
  • Reduced working times

BASIC* 2-in-1 cut-off wheels

for steel and stainless steel

This tool is designed for use on both steel and stainless steel. Our BASIC* cut-off wheel 2in1 has an excellent lifetime and stability. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. The 1.6 mm cut-off wheel available in the BASIC* assortment is particularly suitable for fast, convenient and low-burr work. The stable cut-off wheels in thicknesses between 2.0 and 3.0 mm have a very long lifetime and are suitable for universal use. Show more Show less

  • The chemical purity makes it possible to work on steel and stainless steel
  • Convenient and low-burr cutting with good wheel life
  • Short working times thanks to good cutting ability

BASIC* cut-off wheels

for stainless steel

The BASIC* cut-off wheel for stainless steel can be used to cut metal sheets, profiles, pipes, rods with small diameters and solid material. The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The 1.0 mm thick cut-off wheels are particularly suitable for quick, comfortable and low-burr cutting. Show more Show less

  • The chemical purity of the product prevents corrosion, pitting corrosion and reduction in fatigue strength for good results on stainless steel
  • Convenient and low-burr cutting with good wheel life
  • The thickness of just 1.0 mm enables speed and precision when working

PREMIUM*** laboratory cut-off wheels

for steel and stainless steel

The PREMIUM*** laboratory cut-off wheel is a high-performance cut-off wheel for ferrous metals such as steel and stainless steel. It is used for cutting laboratory samples that have to be cut quickly and without structural alterations, workpiece deformations or cracks. Assembly is usually carried out on wet cutting systems with a manual or automatic feed, at a maximum operating speed of 50 m/s. The workpiece must be fixed during machining and the wheel must not be exposed to lateral load. Laboratory cut-off wheels are available in various specifications: soft for 60.5-72.3 HRC, medium for 22.0-60.5 HRC, hard for less than 22.0 HRC Show more Show less

  • Cuts samples in a laboratory without structural alterations, workpiece deformation or cracks
  • Maximum performance with greatly reduced tool wear
  • Clean cutting quality

STANDARD** 2-in-1 cut-off wheels

for steel and stainless steel

The STANDARD** 2-in-1 wheel is suitable for cutting metal sheets, profiles, pipes, rods and solid material and has been designed to be used on both steel and stainless steel. The standard widths offer a cost-efficient solution to your everyday needs excellent lifetime and stability are guaranteed. The STANDARD** cut-off wheels range from 1.0 to 2.0 mm and guarantee quick and easy operation with the longest tool lifetime. Show more Show less

  • The product offers very good lifetime and stability
  • Quick and convenient to use
  • Environmentally-friendly

PREMIUM *** X-LOCK cut-off wheels

for steel and stainless steel

At the forefront of technology: TYROLIT is one of the first abrasive manufacturers to integrate Bosch’s new mounting system X-LOCK for a broad assortment of cutting discs, grinding wheels and flap discs.The new system for angle grinders makes it incredibly easy to change accessories. Safer working: The new clamping system offers no room for mistakes, making X-LOCK the safest clamping solution on the market. Show more Show less

  • TYROLIT integrates X-LOCK, the new clamping system from BOSCH, for a wide assortment of cut-off wheels, roughing wheels and flap discs
  • The product offers easy handling and the highest safety
  • No loose parts

PREMIUM *** X-LOCK cut-off wheels

for stainless steel

At the forefront of technology: TYROLIT is one of the first abrasive manufacturers to integrate Bosch’s new mounting system X-LOCK for a broad assortment of cutting discs, grinding wheels and flap discs.The new system for angle grinders makes it incredibly easy to change accessories. Safer working: The new clamping system offers no room for mistakes, making X-LOCK the safest clamping solution on the market. Show more Show less

  • TYROLIT integrates X-LOCK, the new clamping system from BOSCH, for a wide assortment of cut-off wheels, roughing wheels and flap discs
  • The product offers easy handling and the highest safety
  • The chemical purity of the product prevents corrosion, pitting corrosion and reduction in fatigue strength for the best results even on stainless steel