PREMIUM*** cut-off wheels

for rail cutting

This wheel has been developed specially based on specifications for cutting rails. Despite extreme application conditions, such as humidity, cold and temperature fluctuations, the rail cut-off wheel from TYROLIT offers short cutting times coupled with minimal effort. Exceptionally clean, non-discoloured surfaces reduce reworking tasks and working times. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

  • The product offers the shortest cutting times with minimal exertion: even with humidity, cold and temperature fluctuations
  • Cleanest surfaces without any discolouration reduce rework and working times
  • Maximum lifetime and stability
  • Also suitable for powerful (over 5 kW) stationary machines

STANDARD** cut-off wheels

for rail cutting

Despite extreme application conditions, such as humidity, cold and temperature fluctuations, the stone cut-off wheel from TYROLIT offers reduced cutting times coupled with minimal effort. Clean, non-discoloured surfaces reduce reworking tasks and working times. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

  • The product offers shortened cutting times with minimal exertion: even with humidity, cold and temperature fluctuations
  • Clean surfaces without any discolouration and reduce rework and working times
  • Very good lifetime and stability
  • Also suitable for powerful (over 5 kW) stationary machines

PREMIUM*** FOCUR SA cut-off wheels

Diamond cut-off wheel for grey and spheriodal cast iron

FOCUR SA diamond cut-off wheels from TYROLIT are the optimum tool for machining grey and spheroidal cast iron. These products combine a long lifetime with maximum economic efficiency. FOCUR SA cut-off wheels are available in diameters from 178 to 600 mm.

  • DIN 13236 safety norm
  • Highest aggressiveness with unbelievable lifetime thanks to an innovative production technology and the use of diamond grains
  • Up to 25 times higher lifetime compared to vitrified bonded tools

PREMIUM*** cut-off wheels

for cast iron

The PREMIUM*** cut-off wheels CAST offer the highest aggressiveness with the best cutting ability at the same time. An innovative manufacturing technology combined with high-quality zirconia alumina makes this possible. The assortment of these cut-off wheels extends from 3.0 to 3.5 mm. The product is available in three degrees of hardness (R, P, N) to cover all applications. This high-performance tool was developed for use on all casting materials. Show more Show less

  • Highest aggressiveness thanks to innovative production technology
  • New bond system combined with high-quality zircon corundum enables shortest cut-off times
  • Maximum comfort when machining the hardest workpieces
  • Best lifetime for economical work

SECUR cut-off wheels

The innovative solution for cut-off grinding

Cut-off grinding – a cutting process with undefined edges – is frequently used in steel mills due to its excellent performance and economic efficiency. With SECUR, TYROLIT offers the ideal tool for every cutting application. Available with a diameter of up to 2,000 mm.

  • Optimises your process costs
  • Enables innovative customised solutions
  • Achieves the best cutting quality
  • Ultimate product safety

SECUR XT

The thinnest conical cut-off wheel

Competence in cutting and grinding - this is what has distinguished Tyrolit for more than one hundred years. Our extensive know-how in the development of cut-off wheels makes us the market-leading supplier in the steel industry. The innovative design of the SECUR EXTRA THIN enables a further reduction of the wheel thickness by up to 20% compared to the SECUR SUPER THIN cut-off wheel and by 36% compared to the SECUR cut-off wheel. Show more Show less

  • Cost savings
  • Customer solutions
  • Reduced energy demand
  • Conical shape

SECUR SUPER THIN

Super thin, super sharp!

The innovative wheel design enables a wheel thickness that is reduced by approx. 20% and is therefore particularly suitable for low-performance machines. Available with a diameter of up to 2,000 mm.

  • High wheel stability
  • For low-performance machines
  • Minimal cutting losses

SECUR EASY CUT

Cut-off wheels in the steel industry for materials with high internal stresses

TYROLIT has developed the SECUR Easy Cut product line with the specific aim of increasing process stability when cutting large workpieces in materials with high internal stresses. The unique combination of conical wheel shape and a completely re-defined wheel topography – with particularly easy cutting side surfaces – reduces the risk of jamming during cutting.

  • Reduced risk of jamming
  • White cut
  • Maximum process stability

SECUR LAB

Laboratory cut-off wheels for metallurgical sample material

The first work step of materialographic sample preparation is cutting the sample, which must be done as quickly as possible and must not cause irreparable damage to the sample. This means no thermal structural alterations, no deformation, no cracks. With SECUR LAB we offer the ideal cut-off wheel for a variety of materials, workpiece dimensions and hardnesses.

  • A smooth cut
  • Precise cutting areas
  • Clean cut-off surfaces
  • High resistance to cooling lubricants
  • Colour coded wheels

SECUR-EXTRA cut-off wheels

The innovative solution for cut-off grinding

SECUR-EXTRA is tough on every casting challenge. This range was developed specially for the harsh requirements of the foundry industry. With its zirconia alumina combined with new bond systems, it ensures optimum cutting ability, low vibration, a long lifetime and the best price-performance ratio for your cutting process. Special production processes and extensive technical safety tests guarantee maximum working safety combined with operating speed and cutting performance. Common operating speeds are 80 m/s and 100 m/s. Show more Show less

  • Maximum product quality
  • Long service life
  • Optimum cutting quality

FOCUR-EXTRA cut-off wheels

Cutting castings with the angle grinder

FOCUR-EXTRA is tough on every casting challenge. This range was developed specially for the harsh requirements of the foundry industry. With its zirconia alumina combined with new bond systems, it ensures optimum cutting ability, low vibration, a long lifetime and the best price-performance ratio for your cutting process.

  • Less effort required through high cutting ability
  • Clean cutting quality
  • Long lifetime
  • Produced according to stringent quality standards
  • Ultimate product safety

FOCUR SA

Diamond cut-off wheel for grey and spheriodal cast iron

FOCUR SA diamond cut-off wheels from TYROLIT are the optimum tool for machining grey and spheroidal cast iron. These products combine a long lifetime with maximum economic efficiency. FOCUR SA cut-off wheels are available in diameters from 178 to 600 mm.

  • Lifetime
  • Economic efficiency
  • Working convenience
  • Quality

PREMIUM*** FOCUR SA cut-off wheels

Diamond cut-off wheel for grey and spheriodal cast iron

FOCUR SA diamond cut-off wheels from TYROLIT are the optimum tool for machining grey and spheroidal cast iron. These products combine a long lifetime with maximum economic efficiency. FOCUR SA cut-off wheels are available in diameters from 178 to 600 mm.

  • DIN 13236 safety norm
  • Highest aggressiveness with unbelievable lifetime thanks to an innovative production technology and the use of diamond grains
  • Up to 25 times higher lifetime compared to vitrified bonded tools

DC ALL Dry cutting saw blades

for any materials

Universal application in the construction and landscaping sector: Building materials, concrete, stone, cast iron, composite materials, plastics, glass, wood, sheets and metal sections. The DC ALL diamond cutting blade is the new allrounder in the TYROLIT assortment. The robust saw blade is excellently suitable for almost all materials on building sites, for any kind of reconstruction work in the house and garden as well as for fire brigade operations. The universal saw blade has an outstanding durability and offers a clean cutting pattern. Show more Show less

  • Very long lifetime and consistent cutting performance

DC-ALL RESCUE Dry cutting saw blades

for any materials

Machinable materials: Building materials, concrete, stone, cast iron, composite materials, plastics, fibre and bulletproof glass, wood, sheets and metal sections. Ideal for rescue operations by fire brigades and security forces. The DC-ALL RESCUE diamond cutting blade is the new allrounder in the TYROLIT assortment. The robust saw blade is excellently suitable for almost all materials on building sites, for any kind of reconstruction work in the house and garden as well as for fire brigade operations. The universal saw blade has an outstanding durability and offers a clean cutting pattern. Show more Show less

  • Very long lifetime and consistent cutting performance

DCCI Diamond cut-off wheel

for grey and spheroidal cast iron

DCCI diamond cut-off wheels from TYROLIT are the optimum tool for machining grey and spheroidal cast iron. These products combine a long lifetime with maximum economic efficiency. FOCUR SA cutting discs are specially designed for slow-rotating machines and are only available in diameters of 350 mm.

DCCI Diamond cut-off wheel

for grey and spheroidal cast iron

DCCI diamond cut-off wheels from TYROLIT are the optimum tool for machining grey and spheroidal cast iron. These products combine a long lifetime with maximum economic efficiency. FOCUR SA cutting discs are specially designed for slow-rotating machines and are only available in diameters of 350 mm.

PREMIUM*** cut-off wheels

cutting rails for guided off-hand process

The newly developed rail cut-off wheel has been designed to be durable and abrasive. The zirconium aluminium oxide grain enables easy cutting and improves performance for the operator. These special rail cut-off wheels must only be fixed to the rail using a suitable clamping device for guided off-hand cutting. Never use in pure off-hand applications. Show more Show less

  • Maximum abrasiveness and lifetime
  • The zirconium aluminium oxide grain gives the wheel especially good cutting ability and improves performance for the operator
  • Reduced load

PREMIUM*** rail cut-off wheels with universal bore

for rail cutting

This wheel has been developed specially based on specifications for cutting rails. Despite extreme application conditions, such as humidity, cold and temperature fluctuations, the rail cut-off wheel from TYROLIT offers short cutting times coupled with minimal effort. Exceptionally clean, non-discoloured surfaces reduce reworking tasks and working times. Additionally, this disc has an included reduction bushingthat enables the product to be mounted on machines with 20 mm and 25,4 mm spindles. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

  • Integrated reduction bush enables use on machines with 20 mm and 25.4 mm spindle
  • Hard specification for increased lifetime and improved cutting performance
  • Cleanest surfaces without any discolouration reduce rework and working times
  • Very comfortable working without great effort