Intensive development work by our best people has resulted in metal workers getting an entirely new assortment of super-thin cut-off wheels. And with an improvement in quality of up to 60%! Three quality levels to success!
Working without exertion
Better surface finish
Precise, accurate cuts
Very little vibration
No noise, little dirt
Higher cutting speed
With the new PREMIUM*** cut-off wheels for stainless steel (0.75 to 2.0 mm thickness), performance is increased while tool wear is considerably reduced. They are one of the strongest weapons in the Tyrolution and are particularly suitable for thin-walled metal sheets, profiles and pipes, as well as reinforced steel.
What's more, these cut-off wheels offer effortless machining even for small stainless steel cross-sections and rods as well as corrosion-resistant or acid-resistant stainless steel.
+ No corrosion, pitting corrosion or reduction in fatigue strength
+ Significant increase in lifetime and cutting ability, which is particularly evident in first-cut performance
TYROLIT PREMIUM cut-off wheels offer better performance than other PREMIUM wheels, and with considerably reduced tool wear. In thicknesses of 1.0 to 1.6 mm, these super-thin cut-off wheels are suitable for all types of steel and impress with exceptional results.
+ Significant increase in productivity
+ Reduction in amount of waste
+ Measurable increase in lifetime and cutting ability
Best results with shorter cutting times right from the very first cut.
We all know that in order to cut nonferrous metals, the tool must have a high cutting ability. To this end, the TYROLUTION has developed a special formula and production method in order to achieve short cutting times with NF metals too. The new specifications prevent the clogging and dulling of the cut-off wheel which used to be a common result of material abrasion.
Or in short: even nonferrous metals have joined the TYROLUTION.
+ Economic efficiency: increased lifetime, cutting ability and reduced cutting times right from the first cut
+ Working convenience: no kick back, no jamming tendency, dramatic reduction in cutting dust and noise
+ Working times: cutting times are reduced when used on aluminium, aluminium bronze, aluminium base alloys, copper, bronze, brass, nickel silver and titanium
When used on tiles, ceramics, clinker and nonferrous metals, the wheel impresses by achieving a better surface finish and excellent cutting quality. Resistance is also futile here too!
The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength.
The field of application for standard cut-off wheels for stainless steel is metal sheets, profiles, pipes and rods. The assortment of these cut-off wheels ranges from thicknesses of 1.0 to 1.9 mm for fast, convenient and low-burr cutting.
Real all-purpose weapons!
Their strengths are small diameters and solid material. Impairments to the material such as corrosion, pitting corrosion or a reduction in the fatigue strength are not to be expected.
The 1.0 mm calibre cut-off wheels are particularly suitable for quick, comfortable and low-burr cutting.
Sounds good. But just good is not good enough for the Tyrolution. That is why these wheels are also synonymous with good lifetime and stability and are suitable for cutting both metal sheets, profiles and pipes as well as rods and threaded rods.